Skip to main content

  • Happy Diwali
    Fakulti Kejuruteraan Mekanikal & Pembuatan
  • Selamat Menyambut Hari Malaysia
    Fakulti Kejuruteraan Mekanikal & Pembuatan
  • UTHM Convocation 2019
    Tahniah!! Anda Kebanggaan Kami. - FKMP
  • Selamat Datang Pelajar 2019/2020
    You are our future - FKMP UTHM
  • Hari Kemerdekaan Ke-62
    Fakulti Kejuruteraan Mekanikal & Pembuatan
  • Eid Al-Adha 2019
    Fakulti Kejuruteraan Mekanikal & Pembuatan
  • Ramadan Karem
    Fakulti Kejuruteraan Mekanikal & Pembuatan
  • Eid Mubarak 2019
    Fakulti Kejuruteraan Mekanikal & Pembuatan
  • Chinese New year 2019
    Fakulti Kejuruteraan Mekanikal & Pembuatan
  • New Year 2019
    Fakulti Kejuruteraan Mekanikal & Pembuatan

Featured Article

NDT: Technology and Employment Opportunities

NDT: Technology and Employment Opportunities
On 14th March 2024, Two speakers from Faculty of Mechanical and Manufacturing Engineering (FKMP), Universiti Tun Hussein Onn Malaysia (UTHM) were invited to sharing knowledge about NDT: Technology and Employment Opportunities at Kolej Vokasional (KV), Batu Pahat, Johor, as CSR activity. AP Ir Dr Shahrul Azmir Osman and Ir Dr Eliza Binti M. Yusup were sharing some knowledge and experience in the said field with about 50 students of Diploma Vokasional Malaysia (DVM) and Sijil Pelajaran Malaysia (SVM) from Welding Technology Program. The program was fully supported by Director of KV; Mr. Abd. Rashid Bin Masduki and the coordinator; Mr. Mohd. Dinie Hafiq Bin Adam. For the first session, the speakers were invited to meet and greet with the director at the director’s office where he expressed his appreciation for the sharing session. Next, the sharing session was held at a conducive classroom with the first speaker was briefly explaining about conventional method of NDT that frequently practice in industry. Followed by second speaker that explaining the opportunities for NDT career in industry. Finally, the students were given opportunity to join the practical session with equipment NDT of method Ultrasonic Testing. Before end the program, exchange token from both institutions and group photo were conducted. All pictures were captured by the faculty official cameraman, Mr. Raminhizad Bin Abd. Razaman.

Read more

Jemputan ke Program Mechanical Open Day

Tempat: Kompleks Teknologi G2 Tarikh: 09/01/2024 (Selasa, Minggu ke 14)  Aturcara program: https://bit.ly/FKMPMechanicalOpenDay.  Komuniti/murid/ibubapa yang berminat untuk hadir pameran sila maklumkan urusetia.   Jika ada yang berminat untuk menyertai drive thru roket air sila daftar di link.   Terima kasih.  Pengarah Program Ahmad Fuad Bin Idris

Jemputan ke Program Mechanical Open Day

Tempat: Kompleks Teknologi G2
Tarikh: 09/01/2024 (Selasa, Minggu ke 14)
Aturcara program:
https://bit.ly/FKMPMechanicalOpenDay.

Komuniti/murid/ibubapa yang berminat untuk hadir pameran sila maklumkan urusetia.

Jika ada yang berminat untuk menyertai drive thru roket air sila daftar di link.

Terima kasih.

Pengarah Program
Ahmad Fuad Bin Idris

Read more

Featured

Others Featured

Pelajar FKMP Penerima Anugerah Tun Abdul Razak

TAHNIAH & SYABAS! Persatuan Pelajar Mekanikal (PPM) mengucapkan sekalung tahniah dan syabas kepada saudara ; ✅ Mifzal Nazhan Bin Mazlan. Selaku pemegang Ijazah Sarjana Muda Kejuruteraan Mekanikal kerana telah berjaya menerima Anugerah Tun Abdul Razak daripada Yayasan Tun Abdul Razak 👨🏻‍🎓

Kami berbangga dengan pencapaian ini dan semoga saudara terus maju kehadapan dan menjadi inspirasi buat semua ✨

Read more

Calon Kem Pusat : SAT International Futsal Championship Thailand 2021

TAHNIAH & SYABAS! Fakulti mengucapkan sekalung tahniah dan syabas kepada wakil pelajar dari Fakulti Kejuruteraan Mekanikal & Pembuatan (FKMP), di atas pencapaian saudara:

1. Muhamad Alif bin Mat Amin

Terpilih sebagai CALON TUNGGAL UTHM yang telah berjaya mendapat tempat dalam sesi kem latihan pusat futsal kebangsaan sebagai persiapan ke SAT International Futsal Championship Thailand 2021 ⚽️

Kami berbangga dengan pencapaian ini dan semoga saudara terus maju kehadapan dan menjadi inspirasi buat semua ✨

Read more

UTHM lancar pesawat latihan akademi penerbangan, dron pertanian

Gambar dari kepilan akhbar Utusan Malaysia. Berita penuh di sini.

Read more

Fun Ride Merdeka UTHM 2020

Fun Ride Merdeka UTHM 2020. Team MechClub FKMP bergambar kenangan bersama Dato NC. Tahniah FKMP

Read more

Slide Set : Shout Out

  • Webinar : Research Centre for Unmanned Vehicle (RECUV)

    Oleh Farid Danial Norazman

    Batu Pahat, 27 Dis 2021 – Research Centre for Unmanned Vehicle (RECUV) dan Kelab Aeronautik UTHM, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia (UTHM) telah bekerjasama menganjurkan program webinar yang bertajuk “Industrial Talk: Airport Management and Financial Management During COVID-19” secara dalam talian.

    Program ini diadakan bertujuan untuk memberi pendedahan kepada para ahli Kelab Aeronautik tentang pengurusan lapangan terbang, selain memberi penekanan terhadap cabaran dan strategi pengurusan lapangan terbang dan kewangan sewaktu dunia dilanda wabak COVID-19.

    Webinar ini telah disampaikan oleh penceramah jemputan, Jefry Ramli yang mempunyai pengalaman selama 19 tahun di Malaysia Airports Holding Berhad (MAHB).

    Jefry menjadi antara pengurus lapangan terbang termuda pada usia 29 tahun dan kini beliau merupakan seorang pengurus lapangan terbang di Lapangan Terbang Antarabangsa Langkawi.

    Pada program ini, Jefry telah memberi perkongsian sedikit sebanyak berkenaan latar belakang Malaysia Airports.

    Beliau juga mengadakan sesi kuiz interaktif bersama ahli Kelab Aeronautik untuk mengetahui kadar pengetahuan am pelajar terhadap pengurusan lapangan terbang serta memberi penerangan tentang model kewangan lapangan terbang.

    Pada sesi tersebut, beliau turut menceritakan tentang hasil pendapatan lapangan terbang yang terbahagi kepada dua iaitu aero revenue dan non-aero revenue, disusuli impak Covid-19 terhadap hasil lapangan terbang.

    COVID-19 telak memaksa negara di seluruh dunia untuk menutup sempadan antarabangsa dan mengenakan sekatan perjalanan yang ketat untuk membendung penularan virus itu.

    Penutupan sempadan yang mengakibatkan penurunan jumlah penumpang yang mendadak pada tahun 2019 dan 2020 memaksa pihak MAHB merancang pelan kelangsungan hidup dan pemulihan.

    Perkongsian yang diberikan beliau telah membuka mata setiap ahli Kelab Aeronautik dalam mengenali dan memahami konsep secara asas perniagaan dan ekonomi lapangan terbang.

    Melalui webinar ini ahli Kelab Aeronautik sedikit sebanyak dapat melengkapkan diri dengan pengetahuan asas sebelum menceburi kerjaya dalam industri penerbangan pada masa akan datang.

  • Postgraduate Programmes Review

    Postgraduate Programmes Review| 29-30 Nov 2021 & 5-6 Dec 2021. Our responsibility to ensure the quality of academic programmes is in place. Appreciate all the feedbacks given by the external examiners, Prof. Ir. Dr. Ahmad Razlan Yusoff (UMP) & Prof. Ir. Dr. Abdul Rahim Abu Talib (UPM) to continously improve our postgraduate programmes.

  • Industrial Advisory Panels Meeting : Dept. of Postgraduate Studies

    [Industrial Advisory Panels Meeting]
    Postgraduate Programmes Review | 1 Nov 2021 | 9.00 a.m.
    Our responsibility to ensure the quality of academic programmes aligns with industrial needs.
    Thank you to all industrial advisory panels who involved in reviewing our postgraduate programmes.
  • Program Gotong Royong Perdana Sayangi UTHM

    Program Gotong Royong Perdana Sayangi UTHM yang berlangsung pada 31hb Oktober 2021. Diucapkan terima kasih kepada warga FKMP yang telah meluangkan masa dan tenaga untuk menjayakan aktiviti. Ini baru FKMP!

  • Majlis Persaraan Prof. Ts. Dr. Badrul Bin Omar

    Pada 30 Sep 2021 yang lepas sekitar jam 12 tgh satu majlis untuk meraikan sempena persaraan Prof Ts Dr Badrul Bin Omar telah diadakan secara online.
     
    Program telah dimulakan dengan ucapan dari YB Dekan FKMP Dr Bukhari Manshoor dan diteruskan dengan ucapan oleh YB Prof Badrul dimana program berakhir pada jam 1 tgh. Terima kasih Prof atas sumbangan bakti dan khidmat yang telah diberikan kepada fakulti. Ramai dari kalangan kami yang menjadi anak didik Prof. Moga ilmu yang dicurahkan dapat dimanfaatkan sebaiknya. Terima kasih kepada Mechclub FKMP, pengerusinya Dr Zamani Ngali yang sama-sama sumbang idea dalam menjayakan program ini. Tidak dilupakan kepada pengacara majlis Hj Nasrul Hatta yang menyerikan majlis dengan rangkap2 pantun yang ohsem.
     
    Tidak dilupakan kepada penyumbang bagi program ini... Anda memang hebat. Program diakhiri dengan sesi penyerahan cenderahati diakhir majlis tersebut.
  • Solidworks Essentials Workshop

    Persatuan Pelajar Mekanikal (PPM) has organized the "Solidworks Essentials Workshop" program. This program was introduced to improve students' skills and knowledge in mastering Solidwork software. Solidworks is a 3D modelling programme that is used to build project models. Through this program, students are more confident to enter the field of employment because they have mastered career-related software.
    🔅The program was held on 9 to 11 September 2021, from 9:00 a.m. to 5:00 p.m. Zoom meet was used as a medium of delivery in this program which was attended by 15 students consisting of students from the Faculty of Mechanical and Manufacturing Engineering.
    ⚜️A special trainer from Six Sigma Synergy was invited namely Jitendra Kumar Nayak as the instructor to the participants who holds the position of senior CAD/CAM Trainer .
    As the organizers, we would like to give a word of appreciation to the participants and also to the trainer of the program in making this program a success.
    Hopefully this program can give an injection of spirit to the participants to continue learning with a strong spirit in order to achieve the ideals stored in the heart.💛
    Thank you🙏🌼


    #ppmfkmp #thisisfkmp #myfkmp
    Persatuan Pelajar Mekanikal (PPM)
    Sesi 2020/2021

  • Majlis Lawatan Projek Public Private Research Network (PPRN) di Parit Sulong

    Majlis Lawatan Projek Public Private Research Network (PPRN) di Parit Sulong, Batu Pahat, Johor. YB Datuk Seri Dr. Noraini binti Ahmad, Menteri Pengajian Tinggi Malaysia telah hadir melawat projek PPRN melibatkan Syarikat Bio Star Resources dan T&M Mee Siput. YB Menteri turut menyampaikan mock cek geran PPRN berjumlah RM27,500 kepada pihak UTHM yang diwakili oleh Datuk Ts. Dr. Wahid bin Razzaly, Naib Canselor UTHM bersama penyelidik Prof. Madya Ts.Dr. Saifulnizan bin Jamian (FKMP) hasil kerjasama dengan Syarikat Bio Star Resources.
  • Virtual audit by EAC for BDD Programme

    7 - 8 Sept 2021. Audit Akreditasi Program Mekanikal BDD oleh EAC.
    Terima Kasih atas bantuan dan kerjasama ahli fakulti dlm membantu menjayakan nya dr mula pengumpulan bahan, laporan hingga ke perjalanan VAV pada hari tersebut.
    Juga panel IAP, pelajar dan alumni khasnya yang sgt ceria dan supportive pada sesi interview tersebut.

  • COHORT 2019/2020| ROUTE TO REEM VIA MDL PATH

    29 August 2021| Briefing on registration of REEM via ECOS system, delivered by Dr Normayati Nordin (MDL Panel Head), was held to guide 10 MDL graduates who are in the REEM path.

    Graduates shall provide transcript, certificate of specialisation and master project thesis on energy efficiency to complete the registration.

     

  • MEETING WITH STAKEHOLDERS (VISITING PROF, POLICY MAKER & IAP)

     

    28 March 2017| Prof. Dr. Ricardo Martinez-Botas from Imperial College was invited to inclusively review the MDL programme at the earlier stage of its development. He has emphasized the essential of MDL to have a unique selling point to be competitive and remained relevant.

    3 April 2017| A meeting involving Ministry of Energy and Natural Resources (KeTSA), Energy Commission (ST) and Sustainable Energy Development Authority (SEDA) was held with the main aim to consult the policy maker views on the direction of MDL programme. The opportunity of MDL to offer a REEM certificate to its graduates has also been agreed upon. Datuk Badriyah Hj Abdul Malek (Deputy Secretary General of KeTSA) and Mr. Zulkiflee Umar (Head of Energy Conservation & Efficiency Department) have been appointed as Industrial Advisory Panels (IAP) to advice further the programme.

    15-16 December 2019| Appreciate views given by the IAPs, Mr Abdul Razak Omar (Dyson) and Ir Zulkafli Mat Rani (AD Associates Sdn Bhd) towards the advancement of MDL.

  • NIOSH OIL AND GAS SAFETY PASSPORT (OGSP)

    Persatuan Pelajar Mekanikal (PPM) had collaborate with NIOSH to organise a programme named NIOSH OIL AND GAS SAFETY PASSPORT (OGSP) program. This programme was held on 21st August 2021 from 8:00 am to 6:00 pm via Zoom platform.
     
    The intention of this programme was to help the participants acquire knowledge on safety and health aspects on the premises of oil and gas companies. Rationally, this NIOSH OIL AND GAS SAFETY PASSPORT OGSP program can provide exposure to students about NIOSH passport and the importance of owning them before working in the industry.
     
    This program is specially intended for final year students of the Faculty of Mechanical Engineering and Manufacturing, UTHM. A total amount of 14 participants joined the program and it was conducted successfully. As the organiser, we would be glad to give a huge appreciation to all the participants. Hope the knowledge gained from this programme will give benefits for your future self✨
     
    Thank you🙏🏻
     
    Persatuan Pelajar Mekanikal (PPM)
    Sesi 20/21
    Fakulti Kejuruteraan Mekanikal Dan Pembuatan
    Universiti Tun Hussein Onn Malaysia
  • PROGRAMME REVIEW BY ADJUNCT PROFESSOR & EXTERNAL EXAMINER

    9 February 2020| Adjunct Professor, Tuan Syed Jaffar Syed Ahmad (PETRONAS) has been invited to review the MDL programme as a whole. Appreciate valuable thoughts by practitioner in field to improve further the programme.

    17 August 2020| Examination papers of MDL have been reen reviewed by the external examiner, Prof. Ir. Ts. Dr. Abd. Rahim Abu Talib (UPM) to ensure satisfactory quality. Appreciate the feedbacks given towards a better quality of papers in future.

  • MQAVA Full Accreditation Audit: Master of Science in Sustainable Energy Engineering [MDL]

    10-11 March 2021 | Thank you to all who involve directly or indirectly to ensure a smooth event. MDL has been successfully granted a full accreditation by MQA [MQA/FA11789]. Thanks to panels. FKMP Terbaik!

    Panel Auditor(s): Prof Ir Dr Kaharudin Dimyati (UM), PM Ir Dr Suhaimi Hassan (UTP)

    Youtube Video >> please click here

    Job Related
    Featured Video Clips

     

    Istiadat Konvokesyen Ke-19, Sidang 3 FKMP
    MECHCLUB 2017-2019. THANK YOU FOR THE MEMORIES.
    Outbound Mobility Program Universiti Tun Hussein Onn Malaysia and Universitas Brawijaya Indonesia.

     

    Video Raya : Pulanglah

     

    Video