Displaying 1 - 50 of 171
No Staff Name Article Detail ISI Impact Factor
1 Syariful Syafiq bin Shamsudin
(Co-author)
Djamal Hissein Didane, Nurhayati Rosly, Mohd Fadhli Zulkafli, Syariful Syafiq Shamsudin
(2018,Published) Performance evaluation of a novel vertical axis wind turbine with coaxial contra-rotating concept, Renewable Energy, Vol: 115, , 353-361, ISSN:09601481.
https://doi.org/10.1016/j.renene.2017.08.070
4.357
2 Al Emran bin Ismail
(Co-author)
A. Hamdan, F. Mustapha, K. A. Ahmad, A. S. Mohd Rafie, M. R. Ishak and A. E. Ismail
(2016,Published) The Effect of Customized Woven and Stacked Layer Orientation on Tensile and Flexural Properties of Woven Kenaf Fibre Reinforced Epoxy Composites, International Journal of Polymer Science, Vol: 6514041, , 11, ISSN:1687-9422.
http://dx.doi.org/10.1155/2016/6514041
1.195
3 Al Emran bin Ismail
(Co-author)
Hamdan, A.; Mustapha, F.; Ahmad, K. A.; Rafie, A. S. Mohd; Ishak, M. R.; Ismail, A. E.
(2016,Published) The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi method., Journal of Vibroengineering, Vol: 18, 2, 699-716, ISSN:1392-8716.
http://www.jve.lt/Vibro/JVE-2016-18-2/JVE0181603.html
0.617
4 Azriszul bin Mohd Amin
(First author)
Mohd Halim Irwan Ibrahim , Azriszul Mohd Amin , Rosli Asmawi and Najwa Mustafa
(2016,Published) Influences of Restaurant Waste Fats and Oils (RWFO) from Grease Trap as Binder on Rheological and Solvent Extraction Behavior in SS316L Metal Injection Molding, Metals Journal, Vol: 6, 2, 1-14, ISSN:20754701.
https://www.scopus.com/record/display.uri?eid=2-s2.0-84958064022&origin=resultslist&sort=plf-f&src=s&st1=MDPI&nlo=&nlr=&nls=&sid
0.883
5 Hamimah bt Abd.Rahman
(Co-author)
NURUL AKIDAH BAHARUDDIN, ANDANASTUTI MUCHTAR, MAHENDRA RAO SOMALU, MUHAMMED ALI S.A., HAMIMAH ABD. RAHMAN
(2016,Published) INFLUENCE OF SINTERING TEMPERATURE ON THE POLARIZATION RESISTANCE OF La0.6Sr0.4Co0.2Fe0.8O3-δ– SDC CARBONATE COMPOSITE CATHODE, Ceramics-Silikáty, Vol: 60, 2, 115-121, ISSN:0862-5468 .
http://www.ceramics-silikaty.cz/index.php?page=cs_content_doi&id_cislo=18
0.435
6 Mohammad Zulafif bin Rahim
(First author)
M. Zulafif Rahim, Songlin Ding, John Mo
(2016,Published) Electrical discharge grinding of polycrystalline diamond – Effect of wheel rotation, Machining Science and Technology: An International Journal, Vol: 20, 1, 62-78, ISSN:10910344.
http://www.tandfonline.com/doi/pdf/10.1080/10910344.2015.1085315?redirect=1
0.703
7 Nor Azali Bin Azmir
(First author)
Nor Azali Azmir, Mohd Imran Ghazali, Musli Nizam Yahya & Mohamad Hanafi Ali
(2016,Published) Hand-arm vibration disorder among grass-cutter workers in Malaysia, International Journal of Occupational Safety and Ergonomics, Vol: 22, 4, 1-6, ISSN:10803548.
http://www.ncbi.nlm.nih.gov/pubmed/27050159
0.53
8 Omar Mohd Faizan bin Marwah @ Omar
(Co-author)
EJ Mohamad, RA Rahim, MHF Rahiman, HLM Ameran, YA Wahab, OMF Marwah
(2016,Published) Document Analysis of crude palm oil composition in a chemical process conveyor using Electrical Capacitance Tomography, Flow Measurement and Instrumentation, Vol: 50, , 57-64, ISSN:0955-5986.
https://www.scopus.com/record/display.uri?eid=2-s2.0-84974594029&origin=resultslist&sort=plf-f&src=s&sid=3343E942BAF503F50A4F696
0.566
9 Omar Mohd Faizan bin Marwah @ Omar
(Co-author)
E.J. Mohamad, R.A. Rahim, M.H.F. Rahiman, H.L.M. Ameran, S.Z.M. Muji, O.M.F. Marwah
(2016,Published) Measurement and analysis of water/oil multiphase flow using Electrical Capacitance Tomography sensor, Flow Measurement and Instrumentation, Vol: 47, , 62-70, ISSN:0955-5986.
https://www.scopus.com/record/display.uri?eid=2-s2.0-84952838184&origin=resultslist&sort=plf-f&src=s&sid=3343E942BAF503F50A4F696
0.566
10 Ong Pauline
(First author)
Pauline Ong, Zarita Zainuddin
(2016,Published) Calibrating wavelet neural networks by distance orientation similarity fuzzy C-means for approximation problems, Applied Soft Computing, Vol: 42, , 156-166, ISSN:1568-4946.
http://www.sciencedirect.com/science/article/pii/S1568494616300308
2.810
11 Ong Pauline
(Co-author)
Z Zainuddin, KH Lai, P Ong
(2016,Published) An enhanced harmony search based algorithm for feature selection: Applications in epileptic seizure detection and prediction, Computers & Electrical Engineering, Vol: In Press, , In Press, ISSN:0045-7906.
http://www.sciencedirect.com/science/article/pii/S0045790616300258
1.084
12 Ong Pauline
(Co-author)
Zarita Zainuddin, Pauline Ong
(2016,Published) Optimization of wavelet neural networks with the firefly algorithm for approximation problems, Neural Computing and Applications, Vol: In Press, , In Press, ISSN: 0941-0643 .
http://link.springer.com/article/10.1007/s00521-015-2140-4
1.492
13 Ramhuzaini Bin Abd Rahman
(First author)
Ramhuzaini Abd. Rahman, Liang He and Nariman Sepehri
(2016,Published) Design and experimental study of a dynamical adaptive backstepping-sliding mode control scheme for position tracking and regulating of a low-cost pneumatic cylinder, International journal of robust and nonlinear control, Vol: 26, 4, 853-875, ISSN:Online ISSN: 1099-1239 .
http://onlinelibrary.wiley.com/doi/10.1002/rnc.3341/abstract
2.527
14 Ramhuzaini Bin Abd Rahman
(First author)
Ramhuzaini Abd. Rahman and Nariman Sepehri
(2016,Published) Design and experimental evaluation of a dynamical adaptive backstepping-sliding mode control scheme for positioning of an antagonistically paired pneumatic artificial muscles driven actuating system, International journal of control, Vol: DOI:10.1080/00207179.2016.1176255, , 1-56, ISSN:1366-5820 (online).
http://www.tandfonline.com/action/journalInformation?show=abstractingIndexing&journalCode=tcon20#.VwSZGI9OLIV
1.880
15 Waluyo Adi Siswanto
(First author)
W.A.Siswanto, M.Nagentrau, A.L.Mohd Tobi, M.N. Tamin
(2016,Published) Prediction of Plastic Deformation under Contact Condition by Quasi-static and Dynamic Simulations Using Explicit Finite Element Analysis, Journal of Mechanical Science and Technology, Vol: Accepted (In Press), -, -, ISSN:1738-494X.
http://www.springer.com/engineering/mechanical+engineering/journal/12206
0.838
16 Yusri bin Yusof
(First author)
Yusof Y., Latif K.
(2016,Published) New technique for the interpretation of ISO 14649 and 6983 based on open CNC technology, International Journal of Computer Integrated Manufacturing, Vol: 29, 2, 136--148, ISSN:0951192X.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84949313443&partnerID=40&md5=56e8a93528dffa5c6edd0560f0a5219d
1.012
17 Ahmad Mubarak bin Tajul Arifin
(Co-author)
Rafiquzzaman M., Abdullah S., Arifin A.M.T.
(2015,Published) Behavioural observation of laminated polymer composite under uniaxial quasi-static and cyclic loads, Fibers and Polymers, Vol: 16, 3, 640--649, ISSN:12299197.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84927133257&partnerID=40&md5=2f68cf87509cb314af77f7f5e295533a
0.881
18 Anika Zafiah bt Mohd Rus
(First author)
Rus A.Z.M., Salim N.S.M., Sapiee N.H.
(2015,Published) Recycling of Cooking Oil Waste into Reactive Polyurethane for Blending with Thermoplastic Polyethylene, International Journal of Polymer Science, Vol: 2015, 829795, --, ISSN:16879422.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84945287696&partnerID=40&md5=e292b8653be3eb6fa42a2ae15f962316
1.195
19 Anika Zafiah bt Mohd Rus
(First author)
Rus A.Z.M., Hassan N.N.M.
(2015,Published) Thermal degradation and damping characteristic of UV irradiated biopolymer, International Journal of Polymer Science, Vol: 2015, 615284, --, ISSN:16879422.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84947461138&partnerID=40&md5=ca729940b725d6ccbc5ff9973de71468
1.195
20 Hasan Zuhudi bin Abdullah
(Co-author)
T.C. Lee, P. Koshy, H.Z. Abdullah and M.I. Idris
(2015,Published) Precipitation of bone-like apatite on anodised titanium in simulated body fluid under UV irradiation, Surface and Coating Technology, Vol: In Press, , In Press, ISSN:0257-8972.
http://dx.doi.org/10.1016/j.surfcoat.2015.11.010
1.998
21 Izzuddin Bin Zaman @ Bujang
(Co-author)
Araby, S., Meng, Q., Zhang, L., Zaman, I., Majewski, P., and Ma, J.
(2015,Published) Elastomeric composites based on carbon nanomaterials, Nanotechnology, Vol: 26, 11, 112001, ISSN:0957-4484.
http://iopscience.iop.org/article/10.1088/0957-4484/26/11/112001/pdf
3.821
22 Maizlinda Izwana bt Idris
(Co-author)
T.C. Lee, P. Koshy, H.Z. Abdullah and M.I. Idris
(2015,Published) Precipitation of bone-like apatite on anodised titanium in simulated body fluid under UV irradiation, Surface and Coating Technology, Vol: In Press, , -, ISSN:0257-8972.
http://dx.doi.org/10.1016/j.surfcoat.2015.11.010
1.998
23 Mohammad Zulafif bin Rahim
(Co-author)
Li, G., Rahim, M.Z., Ding, S., Sun, S.
(2015,Published) Performance and wear analysis of polycrystalline diamond (PCD) tools manufactured with different methods in turning titanium alloy Ti-6Al-4V, International Journal of Advanced Manufacturing Technology, Vol: --, , --, ISSN:02683768.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84945269562&partnerID=40&md5=94f5ea12de960dade735eaaeba8e49e8
1.458
24 Mohammad Zulafif bin Rahim
(First author)
Rahim, M.Z., Li, G., Ding, S., Mo, J., Brandt, M.
(2015,Published) Electrical discharge grinding versus abrasive grinding in polycrystalline diamond machining—tool quality and performance analysis, International Journal of Advanced Manufacturing Technology, Vol: --, , --, ISSN:02683768.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84944562806&partnerID=40&md5=877c319a67c8ecc7f5186170ca7937fe
1.458
25 Mohammad Zulafif bin Rahim
(First author)
M. Zulafif Rahim, Songlin Ding and John Mo
(2015,Published) Electrical Discharge Grinding of Polycrystalline Diamond—Effect of Machining Parameters and Finishing In-Feed, Journal of Manufacturing Science and Engineering, Vol: 137, 2, 1-11, ISSN:15288935.
http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2087218
1.087
26 Mohd Fahrul bin Hassan
(First author)
Hassan M.F., Saman M.Z.M., Sharif S., Omar B.
(2015,Published) Sustainability evaluation of alternative part configurations in product design: weighted decision matrix and artificial neural network approach, Clean Technologies and Environmental Policy, Vol: 18, 1, 63-79, ISSN:1618-9558.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84930910458&partnerID=40&md5=8870a635310cdf9b3268de9c7c847e10
1.934
27 Mustaffa Bin Hj Ibrahim
(Co-author)
OMF Marwah, S Sharif, M Ibrahim, EJ Mohamad, MH Idris
(2015,Published) Direct rapid prototyping evaluation on multijet and fused deposition modeling patterns for investment casting, Journal of Materials Design and Applications, Vol: 2015, , 1464420715590602, ISSN:1464-4207.
http://pil.sagepub.com/content/early/2015/07/16/1464420715590602.abstract
0.672
28 Nik Hisyamudin bin Muhd Nor
(Co-author)
Ahmad M.F., Zakuan N., Rasi R.Z.R.M., Hisyamudin M.N.N., Takala J.
(2015,Published) Mediator effect of total productive maintenance between total quality management and business performance: Survey result in Malaysia automotive industry, Advanced Science Letters, Vol: 21, 12, 3723--3725, ISSN:19366612.
https://www.scopus.com/inward/record.url?eid=2-s2.0-84961285362&partnerID=40&md5=6993c3a5d65aa77fab221275902f9e3a
1.253
29 Omar Mohd Faizan bin Marwah @ Omar
(First author)
OMF Marwah, S Sharif, M Ibrahim, EJ Mohamad, MH Idris
(2015,Published) Direct rapid prototyping evaluation on multijet and fused deposition modeling patterns for investment casting, Journal of Materials Design and Applications, Vol: 229, 6 , doi: 10.1177/1464420715590602, ISSN:14644207.
http://pil.sagepub.com/content/early/2015/07/16/1464420715590602.abstract
0.672
30 Ong Pauline
(Co-author)
Zainuddin Z., Pauline O.
(2015,Published) An effective fuzzy C-means algorithm based on symmetry similarity approach, Applied Soft Computing Journal, Vol: 35, , 433--448, ISSN:15684946.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84937545719&partnerID=40&md5=22a9ced9617c255d1670bfa8c049d504
2.810
31 Reazul Haq bin Abdul Haq
(Co-author)
Adzila S., Azmil K., Radde R., Hassan M.F., Arifin A.M.T., Yunos M.Z., Rahman M.N.A., Haq R.H.A.
(2015,Published) Effect of zinc doped calcium phosphate through mechanochemical synthesis, ARPN Journal of Engineering and Applied Sciences, Vol: 10, 15, 6246--6249, ISSN:18196608.
https://www.scopus.com/inward/record.url?eid=2-s2.0-84940099331&partnerID=40&md5=63d5fc855537b3071a0d439e109e25c6
0.668
32 Reazul Haq bin Abdul Haq
(Co-author)
Rahman M.N.A., Joo Hui U., Haq R.H.A., Hassan M.F., Arifin A.M.T., Yunos M.Z., Adzila S.
(2015,Published) Musculoskeletal discomfort among workers in mould making manufacturing industry, ARPN Journal of Engineering and Applied Sciences, Vol: 10, 15, 6269--6273, ISSN:18196608.
https://www.scopus.com/inward/record.url?eid=2-s2.0-84940039003&partnerID=40&md5=f36d1234d0df0eb9b18a7510e8c2cc25
0.668
33 Sri Yulis Binti M Amin
(Co-author)
Fayyaz A., Muhamad N., Sulong A.B., Yunn H.S., Amin S.Y.M., Rajabi J.
(2015,Published) Micro-powder injection molding of cemented tungsten carbide: Feedstock preparation and properties, Ceramics International, Vol: 41, 3, 3605--3612, ISSN:02728842.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84921820844&partnerID=40&md5=5bb5c68e77511475967d48b18e79fb9c
2.61
34 Waluyo Adi Siswanto
(Co-author)
Perowansa Paruka, Waluyo Adi Siswanto, Md Abdul Maleque, Mohd Kamal Mohd Shah
(2015,Published) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force, Journal of Mechanical Science and Technology, Vol: 29, 5, 1941-1953, ISSN:1738-494X.
http://link.springer.com/article/10.1007%2Fs12206-015-0415-4
0.838
35 Yusri bin Yusof
(First author)
Yusof Y., Latif K.
(2015,Published) A novel ISO 6983 interpreter for open architecture CNC systems, International Journal of Advanced Manufacturing Technology, Vol: 80, 9-12, 1777--1786, ISSN:2683768.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84942365805&partnerID=40&md5=6cdb0b517671911eabc081639142f1a5
1.458
36 Ahmad Mubarak bin Tajul Arifin
(First author)
Arifin A.M.T., Abdullah S., Rafiquzzaman M., Zulkifli R., Wahab D.A.
(2014,Published) Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition, Fibers and Polymers, Vol: 15, 8, 1729--1738, ISSN:12299197.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84906838936&partnerID=40&md5=8fd81d1610db6cc1429d3d3394e3441d
0.881
37 Ahmad Mubarak bin Tajul Arifin
(First author)
Arifin A.M.T., Abdullah S., Rafiquzzaman M., Zulkifli R., Wahab D.A., Arifin A.K.
(2014,Published) Investigation of the behaviour of a chopped strand mat/woven roving/foam-Klegecell composite lamination structure during Charpy testing, Materials and Design, Vol: 59, , 475--485, ISSN:02641275.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84897941517&partnerID=40&md5=04f86aee766b74442006c16401aac622
3.501
38 Ahmad Mubarak bin Tajul Arifin
(First author)
Arifin A.M.T., Abdullah S., Zulkifli R., Wahab D.A., Rafiquzzaman M.
(2014,Published) Behavior of chopped strand mat and woven roving under bending, Materialpruefung/Materials Testing, Vol: 56, 11-12, 994--1000, ISSN:00255300.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84918818245&partnerID=40&md5=3fab2c07ecedc046c621b95192367b65
0.335
39 Amir bin Khalid
(Co-author)
Zaman I., Manshoor B., Khalid A., Araby S.
(2014,Published) From clay to graphene for polymer nanocomposites-a survey, Journal of Polymer Research, Vol: 21, 5 429, --, ISSN:10229760.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84901264381&partnerID=40&md5=0b48fabb497f88bffc6dac0d0f3c395d
1.920
40 Amir bin Khalid
(Co-author)
Zaman I., Manshoor B., Khalid A., Meng Q., Araby S.
(2014,Published) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: A comparative study, Journal of Materials Science, Vol: 49, 17, 5856--5865, ISSN:00222461.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84903532729&partnerID=40&md5=638baed0e96517a8e42fd48bd47d3b5b
2.371
41 Azian binti Hariri
(First author)
Hariri A., Paiman N.A., Leman A.M., Yusof M.Z.M.
(2014,Published) Development of welding fumes health index (WFHI) for welding workplace's safety and health assessment, Iranian Journal of Public Health, Vol: 43, 8, 1045--1059, ISSN:22516085.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84906772341&partnerID=40&md5=bee95286c387e907b1b9a323032336b7
0.55
42 Badrul bin Omar
(Co-author)
Siswanto W.A., Anggono A.D., Omar B., Jusoff K.
(2014,Published) An alternate method to springback compensation for sheet metal forming, Scientific World Journal, Vol: 2014, 301271, --, ISSN:23566140.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84907788560&partnerID=40&md5=ffb0c945c458101523da875c83dada73
1.219
43 Bukhari bin Manshoor
(Co-author)
Zaman I., Manshoor B., Khalid A., Araby S.
(2014,Published) From clay to graphene for polymer nanocomposites-a survey, Journal of Polymer Research, Vol: 21, 5 429, --, ISSN:10229760.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84901264381&partnerID=40&md5=0b48fabb497f88bffc6dac0d0f3c395d
1.920
44 Bukhari bin Manshoor
(Co-author)
Zaman I., Manshoor B., Khalid A., Meng Q., Araby S.
(2014,Published) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: A comparative study, Journal of Materials Science, Vol: 49, 17, 5856--5865, ISSN:222461.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84903532729&partnerID=40&md5=638baed0e96517a8e42fd48bd47d3b5b
2.371
45 Hamimah bt Abd.Rahman
(Co-author)
Baharuddin N.A., Rahman H.A., Muchtar A., Sulong A.B., Abdullah H.
(2014,Published) Effects of deposition time and counter-electrode size on the fabrication of LSCF-SDC carbonate composite cathode for SOFC [Kesan masa pengendapan dan saiz elektrod lawan dalam penghasilan katod komposit LSCF-SDC karbonat untuk SOFC], Sains Malaysiana, Vol: 43, 4, 595--601, ISSN:01266039.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84898613311&partnerID=40&md5=ec2332f70e305641d47b315cb9a35417
0.446
46 Ibrahim bin Masood
(First author)
Ibrahim Masood; Adnan Hassan
(2014,Published) Bivariate quality control using two-stage intelligent monitoring scheme, Expert Systems with Applications, Vol: 41, 1, 7579 - 7595 , ISSN:0957-4174.
http://www.sciencedirect.com/science/article/pii/S0957417414003224
2.24
47 Izzuddin Bin Zaman @ Bujang
(First author)
Zaman, I., Manshoor, B., Khalid, A., and Araby, S.
(2014,Published) From clay to graphene for polymer nanocomposites—A survey, Journal of Polymer Research, Vol: 21, 5, 429, ISSN:1022-9760.
http://link.springer.com/article/10.1007%2Fs10965-014-0429-0#/page-1
1.920
48 Izzuddin Bin Zaman @ Bujang
(First author)
Zaman, I., Manshoor, B., Khalid, A., Meng, Q., and Araby, S.
(2014,Published) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study, Journal of Materials Science, Vol: 49, 17, 5856-5865, ISSN:0022-2461.
http://link.springer.com/journal/10853
2.371
49 Izzuddin Bin Zaman @ Bujang
(Co-author)
Ma, J., Meng, Q., Zaman, I., Zhu, S., Michelmore, A., Kawashima, N., Wang, C.H., and Kuan, H.C.
(2014,Published) Development of polymer composites using modified, high-structural integrity graphene platelets, Composites Science and Technology, Vol: 91, , 82-90, ISSN:0266-3538.
http://www.sciencedirect.com/science/article/pii/S0266353813004533
3.569
50 Koh Ching Teng
(Co-author)
Tonsomboon K., Koh C.T., Oyen M.L.
(2014,Published) Time-dependent fracture toughness of cornea, Journal of the Mechanical Behavior of Biomedical Materials, Vol: 34, , 116--123, ISSN:17516161.
http://www.scopus.com/inward/record.url?eid=2-s2.0-84894297442&partnerID=40&md5=7881e53e36d8957ca33ff236d2843d40
3.417

Pages