Enter a comma separated list of user names.
izwana's picture

Assoc Prof Dr Maizlinda Izwana bt Idris

( PhD, THE UNIVERSITY OF NEW SOUTH WALES, Australia)
Email: izwana@uthm.edu.my
Department: Materials and Design Engineering
Research Group: Bioactive Material (BioMa)


Enter a comma separated list of user names.
Member (No.M082), Microscopy Society Malaysia (MSM) .

Journal Articles

Displaying 43 records.
Enter a comma separated list of user names.
Publication Year Articles
2007 2
2009 1
2010 1
2011 1
2012 3
2013 4
2014 7
2015 14
2016 9
2017 1
43
Enter a comma separated list of user names.
No Journal Detail Index IF
1 T.C. LEE, P. KOSHY, H.Z. ABDULLAH and M.I. IDRIS
(2017) Biomimetic Bone-Like Apatite Coating on Anodised Titanium in Simulated Body Fluid under UV Irradiation, Materials Science Forum, Vol: 888, -, 251-255, ISSN:1662-9752 . (Published)
SCOPUS
2 Mohamad Ali SELIMIN, Maizlinda Izwana IDRIS and Hasan Zuhudi ABDULLAH
(2016) Effect of Current Density on Anodised Titanium in Sulphuric Acid for Biomedical Application, Materials Science Forum, Vol: 840, , 141-145, ISSN:1662-9752 . (Published)
SCOPUS
3 Kanageswary SOCKALINGAM, Hilary NELSON, Maizlinda Izwana IDRIS and Hasan Zuhudi ABDULLAH
(2016) Effects of Pre-treatment Durations on Properties of Black Tilapia (Oreochromis Mossambicus) Skin Gelatin, Materials Science Forum, Vol: 840, , 146-150, ISSN:1662-9752 . (Published)
SCOPUS
4 T.C. LEE, M.H.H. MAZLAN, M.I. ABBAS, Hasan Zuhudi ABDULLAH and Maizlinda Izwana IDRIS
(2016) Effect of Ultrasonic Amplitude on Surface Properties of Anodised Titanium for Biomedical Application, Materials Science Forum, Vol: 840, , 160-164, ISSN:1662-9752 . (Published)
SCOPUS
5 Mohamad Ali SELIMIN, Maizlinda Izwana IDRIS and Hasan Zuhudi ABDULLAH
(2016) Characterisation and Wettability Properties of Anodised Titanium in Sulphuric Acid for Biomedical Application, Materials Science Forum, Vol: 840, , 170-174, ISSN:1662-9752 . (Published)
SCOPUS
6 T.C. LEE, M.H.H. MAZLAN, M.I. ABBAS, Hasan Zuhudi ABDULLAH and Maizlinda Izwana IDRIS
(2016) Effect of Bath Temperature on Surface Properties of Anodised Titanium for Biomedical Application, Materials Science Forum, Vol: 840 , , 175-179, ISSN:1662-9752 . (Published)
SCOPUS
7 T.C. LEE, M.H.H. MAZLAN, M.I. ABBAS, Hasan Zuhudi ABDULLAH and Maizlinda Izwana IDRIS
(2016) Preparation of Bioactive Titanium Film via Anodic Oxidation in Agitation Condition, Materials Science Forum, Vol: 840, , 220-224, ISSN:1662-9752 . (Published)
SCOPUS
8 Kwok Joon TAN, Maizlinda Izwana IDRIS and Hasan Zuhudi ABDULLAH
(2016) Investigation of Surface Properties of Titanium Treated with Combined Alkali and Sodium Removal Treatments, Materials Science Forum, Vol: 840, , 225-230, ISSN:1662-9752. (Published)
SCOPUS
9 T.C. Lee, P. Koshy, H.Z. Abdullah and M.I. Idris
(2016) Precipitation of bone-like apatite on anodised titanium in simulated body fluid under UV irradiation, Surface and Coating Technology, Vol: 301, -, 20-28, ISSN:0257-8972. (Published)
ISI with Impact Factor 1.998
2015
10 T.C. Lee, M.H.A. Rashid, M.A. Selimim, H.Z. Abdullah and M.I. Idris
(2016) Precipitation of Hydroxyapatite on Pure Titanium Substrate via Single Step Anodic Oxidation, Key Engineering Materials, Vol: 694, -, 78-82, ISSN:16629795. (Published)
SCOPUS
11 K. Sockalingam K, M.I. Idris and H.Z. Abdullah
(2015) Effect of Pre-Treatment Conditions on From Black Tilapia Scale for Gelatin Extraction, Advanced Materials Research, Vol: 1125, , 276-280, ISSN:1662-8985 . (Published)
Google Scholar
12 LEE Te Chuan, MAIZLINDA IZWANA Idris, HASAN ZUHUDI Abdullah and CHARLES Christopher Sorrell
(2015) Effect of Electrolyte Concentration on Anodised Titanium in Mixture ofβ-Glycerophosphate (β-GP) and Calcium Acetate (CA), Advanced Materials Research, Vol: 1087, , 116-120, ISSN:1662-8985 . (Published)
Google Scholar
13 HASAN Zuhudi Abdullah, LEE Te Chuan, MAIZLINDA Izwana Idris and CHARLES Christopher Sorrell
(2015) Effect of Current Density on Anodised Titanium in Mixture ofβ-Glycerophosphate (β-GP) and Calcium Acetate (CA), Advanced Materials Research, Vol: 1087, , 212-217, ISSN:1662-8985 . (Published)
Google Scholar
14 K.J. Tan, H.Z. Abdullah, M.I. Idris and C.C. Sorrell.
(2015) Gel Oxidation of Titanium at Low Concentration of Sodium Hydroxide (NaOH), Advanced Materials Research, Vol: 1087, , 340-344, ISSN:1662-8985 . (Published)
Google Scholar
15 K. Sockalingam, M.I. Idris and H.Z. Abdullah
(2015) Effects of Pre-treatment Conditions on Black Tilapia Fish Scales for Gelatin Extraction, Advanced Materials Research, Vol: 1125, , 276-280, ISSN:1662-8985 . (Published)
Google Scholar
16 K.J. Tan, S. Mahmod, M.A.A. Wahab, M.I. Idris and H.Z. Abdullah
(2015) Effect of Heat Treatment on Surface Morphology of Titanium, Advanced Materials Research, Vol: 1125, , 445-449, ISSN:1662-8985. (Published)
Google Scholar
17 T. C. Lee, M. F. M. Rathi, M. Y. Z. Abidin, H. Z. Abdullah and M.I. Idris
(2015) Characterisation and In Vitro Bioactivity of UV-treated Anodised Titanium, Advanced Materials Research, Vol: 1125, , 450-454, ISSN:1662-8985 . (Published)
Google Scholar
18 M.A. Selimin, M.I. Idris and H.Z. Abdullah
(2015) Anodic Oxidation of Titanium in Acetic Acid for Biomedical Application, Advanced Materials Research, Vol: 1125, , 455-459, ISSN:1662-8985 . (Published)
Google Scholar
19 T. C. Lee, M. I. Idris and H. Z. Abdullah
(2015) Effect of UV Light Treatment Condition on Apatite Formation of Anodised Titanium, Advanced Materials Research, Vol: 1125, , 460-464, ISSN:1662-8985 . (Published)
Google Scholar
20 T. C. Lee, H. Z. Abdullah and M. I. Idris
(2015) Effect of UV Wavelength on Apatite Formation of Anodised Titanium, Advanced Materials Research, Vol: 1125, , 465-469, ISSN:1662-8985 . (Published)
Google Scholar
21 M.A. Selimin, Z. Malik, N. Anjang, M.I. Idris, and H.Z. Abdullah
(2015) Surface Characterisation of Bioactive Titanium Formed Via Anodic Oxidation, International Journal of Civil and Structural Engineering, Vol: 2, 2, 44-48, ISSN:2372-3971 . (Published)
Other indexes (not indexed by ISI-JCR, SOPUS, Google Scholar)
22 M.A. Selimin, Z. Malik, N. Anjang, M.I. Idris, and H.Z. Abdullah
(2015) Effect of Sulphuric Acid Concentration on Anodised Titanium for Biomedical Application, International Journal of Civil and Structural Engineering, Vol: 2, 2, 127-131, ISSN:2372-3971. (Published)
Other indexes (not indexed by ISI-JCR, SOPUS, Google Scholar)
23 T.C. Lee, H.Z. Abdullah, and M.I. Idris
(2015) UV-induced Precipitation of Bone-like Apatite on Anodised Titanium in Simulated Body Fluid, International Journal of Civil and Structural Engineering, Vol: 2, 2, 105-109, ISSN:2372-3971 . (Published)
Other indexes (not indexed by ISI-JCR, SOPUS, Google Scholar)
24 T.C. Lee, H.Z. Abdullah, and M.I. Idris
(2015) Mechanism of Bone-like Apatite Formation on Anodised Titanium under UV Irradiation, International Journal of Civil and Structural Engineering, Vol: 2, 2, 149-153, ISSN:2372-3971 . (Published)
Other indexes (not indexed by ISI-JCR, SOPUS, Google Scholar)
25 Zaleha M., Mahzan S., Idris M.I.
(2014) Passive damage detection of natural fibre reinforced composites using sensor response data, Applied Mechanics and Materials, Vol: 534, , 17--23, ISSN:16609336. (Published)
SCOPUS
26 Feriyanto D., Idris M.I.B., Sebayang D., Bin Otman A., Untoro P.
(2014) Microstructure study on Fe/Cr based alloys added with yttrium oxide (Y2O3) prepared via ultrasonic technique for solid oxide fuel cell (SOFC) application, Applied Mechanics and Materials, Vol: 493, , 651--655, ISSN:16609336. (Published)
SCOPUS
27 Yahya S.M., Azmi A., Idris M.I., Yunos M.Z., Mahzan S., Ahmad S., Taib H.
(2014) Short review: Role of metal oxides as filler in polysiloxane sheet composite, Applied Mechanics and Materials, Vol: 465-466, , 27--31, ISSN:16609336. (Published)
SCOPUS
28 Idris M.I., Ehsan I.I.Md., Mohamed S.H.
(2014) Effect of organic space holder in fabrication of clocedcell aluminium foam, Key Engineering Materials, Vol: 594-595, , 780--785, ISSN:10139826. (Published)
SCOPUS
29 Mohamad S.H., Idris M.I., Abdullah H.Z.
(2014) Preparation of polyethersulfone ultrafiltration membrane surface coated with TiO2 nanoparticles and irradiated under UV light, Key Engineering Materials, Vol: 594-595, , 877--881, ISSN:10139826. (Published)
SCOPUS
30 Feriyanto D., Idris M.I., Sebayang D.
(2014) Effect of Cr to Fe onthe solid solubility, lattice parameter and strain of Fe<inf>80</inf>Cr<inf>20</inf>alloy powder, Applied Mechanics and Materials, Vol: 660, , 280--284, ISSN:16609336. (Published)
SCOPUS
31 Mohamad S.H., Abdullah H.Z., Idris M.I., Harun Z., Ismail A.F., Yunos M.Z., Hasan S.
(2014) Influence of polyethylene glycol additive on performance of polysulfone and polyethersulfone membrane, Journal of Mechanical Engineering and Sciences, Vol: 6, , 746--752, ISSN:22894659. (Published)
SCOPUS
32 Mohamad S.H., Abdullah H.Z., Idris M.I., Harun Z.
(2013) Membrane performance: TiO2 nanoparticles coated on polysulfone (PSf) ultrafiltration membrane surfaces, Jurnal Teknologi (Sciences and Engineering), Vol: 65, 4, 65--68, ISSN:01279696. (Published)
SCOPUS
33 Azmi M.A., Abdullah H.Z., Idris M.I.
(2013) Properties of polyurethane foam/coconut coir fiber as a core material and as a sandwich composites component, IOP Conference Series: Materials Science and Engineering, Vol: 50, 1 012067, --, ISSN:17578981. (Published)
SCOPUS
34 Mohamad S.H., Idris M.I., Abdullah H.Z., Ismail A.F.
(2013) Short review of ultrafiltration of polymer membrane as a self-cleaning and antifouling in the wastewater system, Advanced Materials Research, Vol: 795, , 318--323, ISSN:10226680. (Published)
SCOPUS
35 Shan C.W., Ghazali M.I., Idris M.I.
(2013) Improved vibration characteristics of flexible polyurethane foam via composite formation, International Journal of Automotive and Mechanical Engineering, Vol: 7, 1, 1031--1042, ISSN:22298649. (Published)
SCOPUS
36 Shan C.W., Idris M.I., Ghazali M.I.
(2012) Flexible polyurethane foams filled with coconut coir fibres and recycled tyre. Part I: Production and morphology, Advanced Materials Research, Vol: 488-489, , 759--766, ISSN:10226680. (Published)
SCOPUS
37 Shan C.W., Idris M.I., Ghazali M.I.
(2012) Flexible polyurethane foams filled with coconut coir fibres and recycled tyre. Part II: Compression and energy absorption, Advanced Materials Research, Vol: 488-489, , 767--774, ISSN:10226680. (Published)
SCOPUS
38 Zaleha M., Mahzan S., Maizlinda Izwana I.
(2012) A review on the mechanical and physical properties of natural fiber composites, Applied Mechanics and Materials, Vol: 229-231, , 276--281, ISSN:16609336. (Published)
SCOPUS
39 Azmi M.A., Abdullah H.Z., Idris M.I.
(2011) Sandwich composites of glass fibre panel and polyurethane/coconut coir foam core (GFRP - PUC), Key Engineering Materials, Vol: 471-472, , 391--396, ISSN:10139826. (Published)
SCOPUS
40 Vodenitcharova T., Idris M., Hoffman M.
(2010) Experimental and analytical study on the deformation response of closed-cell Al foam panels to local contact damage-Mechanical properties extraction, Materials Science and Engineering A, Vol: 527, 21-22, 6033--6045, ISSN:09215093. (Published)
ISI with Impact Factor 2.09
2010
41 Idris M.I., Vodenitcharova T., Hoffman M.
(2009) Mechanical behaviour and energy absorption of closed-cell aluminium foam panels in uniaxial compression, Materials Science and Engineering A, Vol: 517, 1-2, 37--45, ISSN:09215093. (Published)
ISI with Impact Factor 1.901
2009
42 Idris M.I., Vodenitcharova T., Hoffman M.
(2007) Contact damage response of carbon fibre skin/closed-cell aluminium foam sandwich composites, ICCM International Conferences on Composite Materials, Vol: , , --, ISSN: . (Published)
SCOPUS
43 Idris M.I., Vodenitcharova T., Hoffman M.
(2007) Resistance of thin Al foam panels to deep indentation, Materials Science Forum, Vol: 561-565, PART 1, 357--360, ISSN:02555476. (Published)
SCOPUS

Books

Enter a comma separated list of user names.

No book records found.

Chapter in Book

Enter a comma separated list of user names.

No chapter in book records found.

Article in Proceedings

Enter a comma separated list of user names.

No conference proceedings records found.

Other Publications

Enter a comma separated list of user names.

No other publications found.

Research

Displaying 17 records.
Enter a comma separated list of user names.
Involvement Involved as
Research member 9
Project leader 8
Enter a comma separated list of user names.
No Project Title Start End Involvement Category Funding
1 [ICI I005]
Halal Hydroxyapatite from Fish Bone for Water Filtration
1/12/2015 30/11/2017 Research member University
2 [FRGS 1212]
New Approach of In Vitro Bioactivities of Bioactive Surface Layers on Anodised Titanium
1/4/2013 31/3/2016 Research member National
3 [MDR 1313]
Extraction of Halal Gelatin From Fish Bone And Scale
1/9/2013 29/2/2016 Research member University
4 [FRGS 1419]
New Approach of Preparation Bioactive Surface Layer on Gel Oxidation Titanium
1/12/2013 30/11/2015 Project leader National 75,500
5 [RACE 1442]
In Vitro Bioactivities (UV Light Exposure) On Surface Layer of Anodised Titanium for Biomedical Application
1/12/2013 30/11/2015 Project leader National 48,400
6 [GPP B053]
Preparation and Characterisation of Activated Carbon from Palm Oil Shell aand Fish Bone for Water Treatment Application
21/6/2015 30/11/2015 Project leader University 15,000
7 [GPP B053]
Preparation and Characterisation of Activated Carbon from Palm Oil Shell aand Fish Bone for Water Treatment Application
21/6/2015 30/11/2015 Project leader University 15,000
8 [RAGS R022]
Vibration Damping Properties by Utilisation of Quartz Filled Polysiloxane
15/12/2012 15/9/2015 Research member National
9 [RAGS 1273]
Vibration Damping Properties by Utilisation of Quartz Filled Polysiloxane
1/5/2013 1/11/2014 Research member National
10 [Multi-Disciplinary Research (MDR) 1103]
Development of Nano Composite LSCF Cathode Carbonate for Solid Oxide Fuel Cell (SOFC)
1/10/2012 30/9/2014 Research member University
11 [LRGS A022]
High Performance Polymeric Materials
1/11/2010 30/9/2014 Research member National
12 [GIPS 1248]
New Process of Developing Nanocrystalline FeCr For Fuel Cell Application
1/5/2013 31/8/2014 Project leader University 23,080
13 [ERGS E009]
Damage Severity Detection in Composite Based Natural Fibre Panel Via Intelligent Signal Processing Procedures
1/7/2012 30/6/2014 Research member National
14 [GIPS 1249]
Response of Ultrafiltration on TiO2/PSf and TiO2/PES as Membrane for Self Cleaning and Antifouling
1/5/2013 31/3/2014 Project leader University 11,300
15 [FRGS 0745]
Synthesis and characterization studies on surface modification of multilayer and hybrid porous membrane via different fabrication methods
1/9/2010 28/2/2013 Research member National
16 [UTHM Short Grant 0781]
Research on the Novel Sandwich Composite Panel Based on Glass Fibre skin and Polyurethane Reinforced Coconut Fibre Foam (GFRP-PUC)
15/3/2011 14/9/2012 Project leader University 10,000
17 [RMC (KPT) (Year 2002-2004) 0073]
To Improve the Mechanical Properties of Recycled ABS-PC Blends (Engineering Thermoplastic) by Addition of Additive
1/2/2007 30/4/2007 Project leader National 20,740
219,020

Innovation

Enter a comma separated list of user names.

No innovation records found.

Supervision

Displaying 55 records.
Enter a comma separated list of user names.
PhD
No Supervision Student Status
1 Co- Supervisor
Zaleha binti Mohamad
Advanced Signal Processing to Investigate Impact Damage Severity in Composite Structure
In Progress
2 Supervisor
Lee Te Chuan
In Vitro Bioactivities (UV Light Exposures) on Surface Layer of Anodised Titanium for Biomedical Application
In Progress
3 Supervisor
Tan Kwok Jun
New Approach of Preparation Bioactive Surface Layer on Gel Oxidation Titanium
In Progress
4 Co- Supervisor
Kanageswary A/P Sockalingam
Extraction of Halal Gelatin from Fish Bone and Scale
In Progress
5 Co- Supervisor
Mohamad Ali Bin Selimin
In Vitro Bioactivities and Characterisation of Anodised Titanium and Hydroxyapatite for Biomedical Applications
In Progress
Master by Research
No Supervision Student Status
6 Supervisor
Siti Hawa bte Mohamad
Response of Ultraviolet on TiO2/PES as Membrane for Self Cleaning and Anti Fouling
In Progress
7 Supervisor
Dafit Feriyanto
New Process of Developing Nanocrystalline FeCr for Fuel Application
Completed 2014
8 Supervisor
Mohd Azham Bin Azmi
Sandwich Composites of Glass Fibre Panel and Polyurethane/Coconut Coir Foam Core (GFRP-PUC)
Completed 2012
9 Co- Supervisor
Chan Wen Shan
Characterisation of Developed Flexible Polyurethane Foams Reinforced with Coconut Coir Fibres and Recycled Tyres
Completed 2012
Master by Course
No Supervision Student Status
10 Supervisor
Mohd. Khairul Fadzly bin Md. Radzi
Fabrication of Aluminum Foam by Using Organic Space Holder in Argon Environment
Completed 2012
Bachelor
No Supervision Student Status
11 Co- Supervisor
Farah Danieza Bt Muhmad Afandi
Fabrication of Activated Carbon from Fish Scale for Water Filter Application
In Progress
12 Co- Supervisor
Syahrul Syzwan Bin Supandi
Characterisation of Activated Carbon from Palm Oil Shell for Water Filter Application
In Progress
13 Supervisor
Mohd Hafifi Hafizat Bin Mazlan
Effect of Different Stirring Methods on Anodised Titanium for Biomedical Application
Completed 2015
14 Supervisor
Mohd Fauzi Bin Hamzah
Effect of Sodium Removal Treatment on Gel Oxidation of Titanium
Completed 2015
15 Supervisor
Mohamad Imran Bin Abbas
Effect of UV Light Treatment on Anodised Titanium for Biomedical Application
Completed 2015
16 Supervisor
Zaidi Bin Malik
Anodic Oxidation of Titanium in Sulphuric Acid (H2SO4) solution for biomedical Application
Completed 2015
17 Supervisor
Mohd Saddam Bin Kamarulzaman
The effect of UV treatment on gel oxidation of titanium
Completed 2015
18 Supervisor
Muhammad Hanif Bin Abd Rashid
Effect of acidic and alkaline electrolyte on formation of apatite
Completed 2015
19 Supervisor
Mohd Norhafiz bin Shukor
Kesan nisbah peratusan berat polysiloxane:silika sekam padi terhadap sifat-sifat mekanikal dan getaran
Completed 2014
20 Supervisor
Voneka Nawan anak Saggau
Fabrication of polysiloxane filled crystalline silica via compression moulding at 65C curing time for 24 hours
Completed 2014
21 Supervisor
Siti Nur Diyana binti Zulkepli
Effect of mixng ratio on the fabrication of polysiloxane filled crtytalline silica via compression moulding at curing temperature 100C in 24 hours
Completed 2014
22 Supervisor
Eugenie Sudan Buda
Effect of temperature and mixing ratio on the fabrication of polysiloxane filled crystalline silica via casting properties
Completed 2014
23 Supervisor
Muhammad Fareez Bin Mohamad Rathi
Pengoksidaan anod titanium dalam kalsium asetat dan -gliserofosfat untuk kegunaan bioperubatan
Completed 2014
24 Supervisor
Muhamad Yusuf Bin Zainal Abidin
Kesan sinaran ultra ungu terhadap pertumbuhan hidroksiapatit pada titanium
Completed 2014
25 Supervisor
Muhammad Asyraf Bin Abdul Wahab
Effect of NaOH treatment on gel oxidation of titanium
Completed 2014
26 Supervisor
Sahkila Binti Mahmod
Kesan rawatan haba dalam proses pengoksidaan gel terhadap titanium
Completed 2014
27 Supervisor
Kanageswary A/P Sockalingam
Hybrid composite polypropelene (PP) reinforced with fly ash (FA) and palm oil kernel shell (PKS)
Completed 2013
28 Supervisor
Ng Kei Hoa
Response surface modelling and optimization of PVA/PEG/AGNO3 coating on PSF ultrafiltration membranes
Completed 2013
29 Supervisor
Lee Hao Yi
Hybrid composite polyethylene (PE) reinforced with coconut coir and wood dust
Completed 2013
30 Supervisor
Desigan A/L Manveeran
Intraply laminated hybrid composite polypropelene (PP) reinforced with palm oil mesocarp fiber and coconut coir
Completed 2013
31 Supervisor
Lee Te Chuan
Modified PVA encapsulated photocatalyst argentums oxide for Cr(VI) reduction
Completed 2013
32 Supervisor
Kalaiyarasu a/l Gopalan
Synthesis and characterization of flexible silica aerogel
Completed 2013
33 Supervisor
Nurul Khahidaraain bt Khalid
Effect of the different molecular weight of PEG on PS Membrane
Completed 2013
34 Supervisor
Nur Khairunnisa bt Mohd Zahari
Response of Ultraviolet on PEG + PES + TiO2 as membrane for self cleaning and anti fouling
Completed 2013
35 Supervisor
Siti Hawa binti Mohamad
Kesan magnesium terhadap penghasilan aluminium berliang.
Completed 2012
36 Supervisor
Wan Noor Ili binti Wan Mohd Saifulddin
Effect of fiber treatment to semi rigid polyurethane foam reinforced coconut coir sandwich composite
Completed 2012
37 Supervisor
Siti Meryam binti Zulkifli
Penghasilan komposit termoplastik bergentian kelapa dan serbuk kayu
Completed 2012
38 Supervisor
Marlina binti Mohamad
Komposit berlamina epoksi bergentian nenas dan sabut kelapa
Completed 2012
39 Supervisor
Sharida binti Adnan
Mechanical properties of semi rigid polyurethane foam reinforced coir particle sandwich composite
Completed 2012
40 Supervisor
Nor@Sara Wazihan binti Paying
Kesan Orientasi Gentian Kaca Kepada Sifat-Siafat Komposit Polimer
Completed 2012
41 Supervisor
Islina binti Mohamed Din
Kesan Keasaran Permukaan Terhadap Perlekatan Permukaan Komposit
Completed 2012
42 Supervisor
Norzeala binti Muhamat
Penghasilan Karbon Teraktif dengan Menggunakan Tempurung dan Sabut Kelapa
Completed 2012
43 Supervisor
Nur Muhammad bin Manja
Penghasilan dan Pencirian Salutan Titanium Dioksida Ke Atas Komposit Bergentian Kaca
Completed 2012
44 Supervisor
Muhammad Fatah bin Che Yusoff
Mechanical properties of flexible polyurethane foam reinforced coconut coir particle
Completed 2011
45 Supervisor
Muhammad Zulhilmy Bin Yaman
The mechanical properties of glass composites panels via different techniques
Completed 2011
46 Supervisor
Mohd Sharifuddin Bin Omar
The mechanical properties of rigid, semi rigid and flexible polyurethane foam
Completed 2011
47 Supervisor
Muhammad bin Zulkipli
Domestic Glass Window Mirror Using Fiberglass.
Completed 2010
48 Supervisor
Erny Raudhoh Bt Mohd Shafie
A Composite Material Using Recycled Plastic Bottle (PETE) With Coconut Shell For Household Applications.
Completed 2010
49 Supervisor
Erny Raudhoh Bt Mohd Shafie
A Composite Material Using Recycled Plastic Bottle (PETE) With Coconut Shell For Household Applications.
Completed 2010
50 Supervisor
Ibrahim Islam bin Md. Ehsan
Aluminium Foam Fabrication using Powder Metallurgi
Completed 2010
51 Supervisor
Mohd Syahrol Azmil Bin Kasem
The Effect between ABS -Acrylonitrile butadiene styrene and Coconut fiber to Produce Automotive Body parts
Completed 2010
52 Supervisor
Lau Kam Weng
Kesan Penambahan Ytrium dan Zirkonia Cesium terhadap Penghasilan Intermetalik Fe-Al.
Completed 2005
53 Supervisor
Mohd Rashid Bin Mohamad Rawi
Kesan Saiz Partikel Aluminium dan Ferum dalam Penghasilan Intermetalik Fe-Al.
Completed 2005
54 Supervisor
Airul Aznie Bin Mohd Sahari
Kesan Kerja Sejuk dan Sepuh Lindap Terhadap Mikrostruktur dan Kekerasan Logam Silikon Karbida
Completed 2002
55 Supervisor
Lim Yi Shiang
Determine and Analysis The Mechanical and Physical Properties of Paper and Recycled Paper
Completed 2002

Awards

Displaying 11 results.
Enter a comma separated list of user names.
Award
No Achievement Information Category Year
1
Seminar on Advanced Materials Characterisation Techniques in Research, Industry and Nuclear Application 2015,9th - 10th June 2015, at Palace of The Golden Horses, Seri Kembangan, Selangor
Project leader
Effect of Ultrasonic Amplitude on Surface Properties of Anodised Titanium for Biomedical Application
Best poster
National 2015
2
Seminar on Advanced Materials Characterisation Techniques in Research, Industry and Nuclear Application 2015 (AMCT 2015), 9th - 10th June 2015, at Palace of The Golden Horses, Seri Kembangan, Selangor
Member
Effects of Pre-treatment Durations on Properties of Black Tilapia (Oreochromis Mossambicus) Skin Gelatin
Best poster
National 2015
3
The 26th International Invention, Innovation & technology Exhibition 2015 ( ITEX 2015), 21st – 23rd May 2015, at Kuala Lumpur Convention Centre (KLCC),
Member Extraction of High Value Added Gelatin Biopolymer from Black Tilapia Head Bones
Bronze medal
International 2015
4
The Malaysia Technology Expo (MTE 2015), 12 – 14 February 2015, at Putra World Trade Centre, Kuala Lumpur, Malaysia
Member
Halal Natural Derived Hydroxyapatite from Black Tilapia Fish Bone and Scale (Tila-Hap)
Silver medal
National 2015
5
The International Conference And Exposition On Inventions By Institutions Of Higher Learning 2015 (Pecipta'15), 4-6 December 2015, Kuala Lumpur Convention Centre
Member Natural Hydroxyapatite From Black Tilapia Bone And Scale
Bronze medal
International 2015
6
Seoul International Invention Fair 2015 (SIIF 2015), 26-29th November 2015, at Seoul, Korea
Member Halal Hydroxyapatite From Tilapia Fish Bone And Scale (TILA-HAP)
Gold medal
International 2015
7
The International Exposition on Syariah Compliant Idea, Invention, Innovation & Design (ISCIIID2014), 26th – 27th November 2014, at UiTM, Shah Alam, Selangor
Member Halal Natural Derived Hydroxyapatite from Black Tilapia Fish Bone and Scale
Gold medal
International 2014
8
The International Exposition on Syariah Compliant Idea, Invention, Innovation & Design (ISCIIID2014), 26th – 27th November 2014, at UiTM, Shah Alam, Selangor
Member Halal Gelatin From Black Tilapia Scales (GelaTis)
Gold medal
International 2014
9
The Research & Innovation Festival 2014, 2-3 November 2014, at Dewan Tunku Mahkota Ismail, Universiti Tun Hussein Onn Malaysia
Project leader
Anodic Oxidation of Titanium in Mixture of β-Glycerolphosphate (β-GP) and Calcium Acetate (CA) for Biomedical Application
Silver medal
University 2014
10
The Malaysia Technology Expo (MTE),16-18 February 2012 at Putra World Trade Centre
Member
Flexible Polyurethane Foams Reinforced with Coconut Coir Fibres and Recyled Tyre for Cushioning Material
Silver medal
National 2012
11
The Research & Innovation Festival 2011, 23-24 November 2011, at ORICC, Universiti Tun Hussein Onn Malaysia
Member
Improvement of Vibration Trasmissibility in Flexible Polyurethane Foams (Cushion Material) using Coconut Coir Fibres and Recyled Tyre Insert
Silver medal
University 2011

Management

Enter a comma separated list of user names.

No management experience records found.

Enter a comma separated list of user names.

No working experience records found.

Attended Courses

Enter a comma separated list of user names.

No attended course records found.

Teaching Experience

Displaying 21 records
Enter a comma separated list of user names.
Employer: UTHM
No Session Course
1 Bachelor Sem 2 2012/2013
Materials Engineering Selection (BDA 20402 )
2 Bachelor Sem 1 2012/2013
Composites (BDB 4073 )
3 Bachelor Sem 2 2011/2012
Composites (BDB 4073 )
4 Bachelor Sem 1 2011/2012
Materials Engineering Selection (BDA 20402 )
5 Bachelor Sem 1 2011/2012
Materials Engineering Selection (BDA 2042 )
6 Bachelor Sem 1 2011/2012
Engineering Laboratory 2 (BDA 27001)
7 Bachelor Sem 2 2010/2011
Materials Engineering Selection (BDA 2042 )
8 Bachelor Sem 2 2010/2011
Materials Engineering Selection (BDA 20402 )
9 Master Sem 2 2010/2011
Advanced Composites (MDB 10103 )
10 Master Sem 2 2010/2011
Research Methodology (MDU 10100 )
11 Diploma Sem 1 2010/2011
Makmal Kejuruteraan 1 (DDA 2711 )
12 Bachelor Sem 1 2010/2011
Materials Engineering Selection (BDA 2042 )
13 Master Sem 1 2010/2011
Advanced Composites (MKM 2203 )
14 Master Sem 1 2010/2011
Research Methodology (MDU 10100 )
15 Bachelor Sem 2 2009/2010
Materials Engineering Selection (BDA 2042 )
Employer: Other
No Session Course
16 KUiTTHO Bachelor Sem 2 2003/2004
Sains Bahan (BKF 1233 )
17 KUiTTHO Bachelor Sem 2 2003/2004
Pemilihan Bahan Kejuruteraan (BKM 5033 )
18 KUiTTHO Bachelor Sem 2 2003/2004
Pemilihan Bahan Kejuruteraan (BMB 3013 )
19 KUiTTHO Bachelor Sem 2 2002/2003
Sains Bahan (BKF 1233 )
20 KUiTTHO Bachelor Sem 2 2002/2003
BahanTermaju (BMB 4053 )
21 KUiTTHO Bachelor Sem 1 2002/2003
Mekanik Kejuruteraan (BKF 1123 )